No products in the cart.
Alison's Biciclette
Taya Deca-101 10 Speed Chain Ti Black 116L
The DECA-101 refines perfection in both design and functionality. The sophisticated coating on the surface improves scratch-resistant and the DHT treatment applied also enhances durability and strength.
Key Features
• DHT treatment
• Outer chamfered outer plates
• Inner chamfered plates
• Super length inner chamfer
• Sup punched pin
• E-Bike rated£23.99Oxford 1” Traditional Threaded Steel Headset Black
Traditional steel headset to fit 1″ headtube
Black Finish
£6.14XLC All Mountain Riser Bar MTB-M19 780 x 31.8mm x 30mm Rise
The XLC All MTB Riser-Bar HB-M19 is perfect for use on any type of mountain bike. The handlebars are a stylish black colour with either a matt or gloss finish, and are made from strong double butted aluminium 2014-T6.
£19.99Acor 1.1/8″ Black Steel Bicycle Headset Threadless External
Acor 1.1/8″ Black Steel Aheadset
5-piece headset designed to fit 1.1/8″ (28.6mm) ahead MTB forks.- Material: Steel
- Colour: Black
- Stack height: 23mm
- Bearings: Unsealed
- Crown race: 30mm
- Top Cup: 34mm
- Bottom Cup: 34mm
£8.49Oxford Loam 20 Nylon Flat Pedals Orange
Oxford Loam Flat Pedals have been designed with a wide surface area and narrow profile for maximum grip and reduced pedal strikes. The 20 removable pins can be adjusted to fine tune your preferred level of grip, offering control no matter the trail conditions or environment you ride.
Key Features:
• High impact nylon body
• Chromoly 9/16″ axle
• Sealed bearings
• 20 replaceable pins per pedal
• 412g per pair
• Available in a selection of colours
• Platform size: 114mm X 110mm£21.49Oxford Threaded HeadSet 1 1/8′ EC34/EC34 30
Description:
Oxford external threaded headset.
Key Features
• Carbon steel cups
• Caged bearings
• 1 1/8″ EC34/EC34 30£6.99XLC All Mountain Riser Bar MTB-M19 780 x 31.8mm x 15mm Rise
The XLC All MTB Riser-Bar HB-M19 is perfect for use on any type of mountain bike. The handlebars are a stylish black colour with either a matt or gloss finish, and are made from strong double butted aluminium 2014-T6. This means that the aluminium is thicker at the join for strength but thinner in the middle to save weight. The XLC All MTB Riser-Bar HB-M19 handlebar is 31.8mm x 50mm in size and has a width of 780mm. They may feel slightly taller as they have a rise of 50mm. The handlebars are 310g in weight. These features combine to make the bars extremely comfortable while steering when used on a mountain bike.Full suspension, hardtail, e-bike, sports bike, you name it if it’s a mountain bike, the XLC All MTB Riser-Bar HB-M19 is perfect for your off-road pursuits.
£19.99Oxford Semi-Integrated Headset 1 1/8″ ZS44/ZS44 30
Description:
Oxford semi-integrated threadless headset.
Key Features
• Alloy 6061 cups
• Sealed bearings
• Alloy top-cap, star washer and preload bolt included
• 1 1/8″ ZS44/ZS44 30£16.49XLC All MTN A-Head stem ST-M27 1 1/8” ø 35mm 60mm 0° Black/Matt
XLC All MTN A-Head stem ST-M27
Material: Alloy 6061, 3D-forged
Length 60mm
Bar Bore Ø 35mm center diameter
1 1/8″ Steerer Tube
0 Degree Rise
Weight: 146g
£16.49Oxford External Headset 1 1/8′ EC34/EC34 30
Description:
Oxford external threadless headset.
Key Features
• Alloy 6061 cups
• Sealed bearings
• Alloy top-cap, star washer and preload bolt included
• 1 1/8″ EC34/EC34 30£14.29Oxford External Headset 1 1/8′ EC34/EC34 30
Description:
Oxford external threadless headset.
Key Features
• Carbon steel cups
• Caged bearings
• Alloy top-cap, star washer and preload bolt included
• 1 1/8″ EC34/EC34 30£10.99Truvativ Stem Descendant 50 0Deg 31.8 1-1/8 Black
Mix and Match might work for clothing, but not your mountain bike cockpit.
The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars
Not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction.
£47.99Oxford Alloy Headset Sealed 1 1/8″ Black Threadless
Description:
- 1 1/8″
- Sealed bearing
£13.69Oxford USA BMX Bottom Bracket Cup Set
Description:
Complete cup and caged bearing set£4.69
Oxford Threaded HeadSet 1″ EC30/EC30 27
Description:
Oxford external threaded headset.
Key Features
• Carbon steel cups
• Caged bearings
• 1″ EC30/EC30 27£6.49XLC All Ride Ahead Stem +/-7°, 1 1/8 Inch Diameter 31.8 mm Length 80 mm
XLC Pro All Ride A-Head Stem ST-M26
Material: Alloy 7050, 3D-forged
Angle: +/- 7°
Clamping: 31.8mm
Steerer Tube 1 1/8″
Length 80mm
Weight: 95 g
£13.49FSA Orbit 1.5E ZS Semi-Integrated 44.0/56.0mm Headset 1.1/8″
- 1.1/8″, 36°×45° ACB
- For tapered 50mm/62mm OD Head Tube
- 1.1/8″ to 1.5″ steerer
- Alloy top cover
- Upper: Forged alloy cup with ACB (blue seal)
- Lower: 1.5″ CNC machined alloy cup with ACB (blue seal)
- Stack height: 16.9 + 2.9 = 19.8mm
- Weight: 129.6g
Spares:
- Upper Bearing: TH873 (160-1648)
- Lower Bearing: TH073 (160-6761)
- Crown Race: 1.1/8-1.5” (H6088, 160-5551)
£38.49
Alison's Biciclette
- Oakfield Cottage, Broadoak Newnham on Severn, Gloucestershire, United Kingdom (UK)
- admin@alisonsbiciclette.co.uk
- No ratings found yet!