No products in the cart.
Alison's Biciclette
Oxford Hollowtech BB30 Bottom Bracket (86.5mm)
Oxford has increased its offering of bottom brackets to cover Hollowtech and DUB standards.
The range now includes pressfit and threaded bottom brackets with a range of spindle diameters to suit most modern bicycle specifications. Sealed, durable bearings for smoothness and bottom bracket bodies made from hard wearing alloy and nylon for longevity.
£22.99Oxford Hollowtech T47 Bottom Bracket (68/73mm)
Oxford has increased its offering of bottom brackets to cover Hollowtech and DUB standards.
The range now includes pressfit and threaded bottom brackets with a range of spindle diameters to suit most modern bicycle specifications. Sealed, durable bearings for smoothness and bottom bracket bodies made from hard wearing alloy and nylon for longevity.
£22.99XLC Chainstay Protection Neoprene Black Bicycle Frame 200x160x160mm
The XLC chainstay protector is a black neoprene accessory that is intended to protect the paintwork of the chainstay from chain strikes. The dimensions of the CP-N03 are 260 x 160 x 160 mm and is attached to the bike using a Velcro fastener.
£3.99XLC Chainstay Protection Neoprene Black Bicycle Frame 200x160x160mm Chain Pattern
The XLC chainstay protector is a black neoprene accessory that is intended to protect the paintwork of the chainstay from chain strikes. The dimensions of the CP-N03 are 260 x 160 x 160 mm and is attached to the bike using a Velcro fastener.
£4.99XLC Chainstay Protection Neoprene Black Bicycle Frame 260x80x100mm
The XLC chainstay protector CP-N04 is a black neoprene accessory that is intended to protect the paintwork of the chainstay from chain strikes. The dimensions of the CP-N03 are 260 x 80 x 100 mm and is attached to the bike using a Velcro fastener.
£3.99XLC Chainstay Protector MTB Mountain Bike Bicycle Neoprene Skins Frame Guard
- Neoprene Frame guard
- Easy to fit Velcro fastening
- 260mm Length
£3.99BBB BTI-99 – Valve Extend X2 with Tool 50mm or 80mm
Aluminium valve extenders
£9.99SUNRACE Bottom Bracket Square Taper BBS 15 68mm
Square taperFor 68mm shell
£7.49Stronglight Italian Tapered Bottom Bracket 68mm x 110, 119 and 122mm
Stronglight JP400 Italian Bottom Bracket with Conical JIS square tapered axle.
£16.49Shimano BB-UN300 Bottom Bracket BSA Square Taper 68×122.5 mm
A good quality bottom bracket for traditional chainsets.
£13.49Sturmey Archer Components; Circlip, Clutch Sleeve, Pawl Spring, Axle Key…….
Sturmey Archer Components; Circlip, Clutch Sleeve, Pawl Spring, Axle Key…….
£1.29 – £4.99Oxford Seat Post Conversion Shim 26.4 – 28.0mm or 29 – 31.8mm
These are Seat post shim adapters.
£6.99Oxford Replacement Bicycle Sealed Headset Bearings
Oxford replacement sealed headset bearings.
£3.99 – £5.49Sturmey Archer Indicator S3X Orange or White
Sturmey Archer Indicator S3X Orange or White
£3.39Oxford Mudguards Components Pack Stays Mudguard Bridge and Fittings Bolts
These are Oxford Mudguard Components Pack designed for their 700C and 26” Mudguards. However they could be used on any mudguards with the same dimensions as a replacement set.
£6.19 – £6.49Oxford Cycle Replaceable Alloy Gear Hanger Dropout Type F – MARIN, SCHWINN
The gear hanger is designed to bend or break and so protect damage to the frame. Often simple actions such as resting the bike gear side down in the back of your car so the weight is on the rear mechanism, or leaning other bikes onto your bike so their weight is on the rear mechanism, can cause a bent or broke gear hanger.
£8.15Oxford Tubeless Valve Cores (Pack of 4) and Alloy Cap Tools
This is a pack of 4 Oxford Tubeless Valve Cores and 2 Alloy Cap Tools
£3.99Oxford Cycle Replaceable Alloy Gear Hanger Dropout Type A – TREK, GARY FISHER
The gear hanger is designed to bend or break and so protect damage to the frame. Often simple actions such as resting the bike gear side down in the back of your car so the weight is on the rear mechanism, or leaning other bikes onto your bike so their weight is on the rear mechanism, can cause a bent or broke gear hanger.
£7.99Oxford Cycle Replaceable Alloy Gear Hanger Dropout Type B – GIANT, KONA, COLNAGO
The gear hanger is designed to bend or break and so protect damage to the frame. Often simple actions such as resting the bike gear side down in the back of your car so the weight is on the rear mechanism, or leaning other bikes onto your bike so their weight is on the rear mechanism, can cause a bent or broke gear hanger.
£7.99
Alison's Biciclette
- Oakfield Cottage, Broadoak Newnham on Severn, Gloucestershire, United Kingdom (UK)
- admin@alisonsbiciclette.co.uk
- No ratings found yet!