No products in the cart.
Alison's Biciclette
Oxford Freewheel 18T x 1/2” x 1/8” Cr-Mo
- Cold extruder for closer tolerance and better finish
- 3 pawl design for faster pickup
- Black and nickel finish
£9.19Oxford Cotter Pins Standard 3/8” PAIR
This is for a Pair Oxford Cotter Pins Standard 3/8”
£0.99Oxford Freewheel Single Speed 1/8″ x 16T
- 16T screw on 1/8″ chrome finish freewheel
£5.29Oxford Freewheel Single Speed 1/8″ x 18T
18T screw on 1/8″ single speed freewheel
£4.99Oxford Standard Bottom Bracket Cup & Bearing Set
Description:
Complete cup and caged bearing set
£4.99Oxford Mint Chain Cleaner Tool
Cleaning your chain is now a breeze thanks to Oxford’s new Mint Chain Cleaning Machine. Simple to put together and even easier to get your chain clean and ready for your upcoming ride!
Oxford’s Mint Chain Cleaning Machine allows you to clean even the dirtiest of chains and still keep the mess contained. The specially designed roller brushes guide the chain through smoothly while also getting in to every inch of the chain and removing all dirt, grit and grime which can damage and shorten the life of your bike’s drivetrain.
Key Features
• A speedy alternative to cleaning your chain by hand
• Increases the lifespan of your chain
• Easily removes chain oil, grease and grime in seconds
• Quick and easy to clean and re-useInstructions
1. Slide lid back and lift lid to remove (ensure handle is not attached)
2. Fill bottom section with Mint Degreaser (fill above minimum line)
3. Re-fit the lid with the chain inside
4. Slide on handle until you hear a click
5. Hold onto the handle and slowly rotate the crank-arm backwards so the chain completes several revolutions through the machine *
6. Remove degreaser with Mint Bike Wash, then dry the chain with an Oxford microfibre cloth* For E-Bikes make sure the battery is turned off before going through these steps and use a workshop stand to hold the bike as you pedal forwards
£10.69Shimano SL-RS45 Revoshift With Optical Gear Display Left 3 Speed
Tourney RS45 Revoshifter offers easy gear shifting at the flick of the wrist
£9.99Sunrace FCR810 Road Chainset 53/39T With Extra Chainrings 52/42T
Sunrace R80 53/39T Road Chainset With Spare Rings
£45.99Taya e-Deca-101 10 Speed Chain Silver 136L
TAYA has developed a range of chains specifically designed to deal with the greater torque and stress an e-bike delivers to the drivetrain. All current safety standards have been matched, plus the TAYA-DHT (Diamond Hard Treatment) means the chain also has up to HK 2,000 hardness, prolonging the life of the chain.
The E-bike range has shown flawless compatibility with the Bosch series (350W, 75Nm), Yamaha series (500W, 80Nm) as well as other leading E-bike systems and the superior strength of the chains means they are approved for 1000W and 160Nm torque mid-drive systems.
Key Features
• DHT treatment
• E-Bike recommended
• Outer chamfered outer plate
• Inner chamfered plate
• Super length inner chamfer
• Sub punched pins£23.99Taya e-Onze-111 11 Speed Chain Silver 136L
TAYA has developed a range of chains specifically designed to deal with the greater torque and stress an e-bike delivers to the drivetrain. All current safety standards have been matched, plus the TAYA-DHT (Diamond Hard Treatment) means the chain also has up to HK 2,000 hardness, prolonging the life of the chain.
The E-bike range has shown flawless compatibility with the Bosch series (350W, 75Nm), Yamaha series (500W, 80Nm) as well as other leading E-bike systems and the superior strength of the chains means they are approved for 1000W and 160Nm torque mid-drive systems.
Key Features
• DHT treatment
• E-Bike recommended
• Outer chamfered outer plate
• Inner chamfered plate
• Super length inner chamfer
• Sub punched pins£26.99Oxford Chain Guard – Smokey Black
Length from the middle of the posterior attachment point to the inside of the from chainring guard is 39cm
£8.99Oxford Bottom Bracket Sealed Cartridge 68mm Threadless
This is an Oxford Bottom Bracket Sealed Cartridge 68mm Threadless
£16.99Oxford Loam 20 Nylon Flat Pedals Red
Oxford Loam Flat Pedals have been designed with a wide surface area and narrow profile for maximum grip and reduced pedal strikes. The 20 removable pins can be adjusted to fine tune your preferred level of grip, offering control no matter the trail conditions or environment you ride.
Key Features:
• High impact nylon body
• Chromoly 9/16″ axle
• Sealed bearings
• 20 replaceable pins per pedal
• 412g per pair
• Available in a selection of colours
• Platform size: 114mm X 110mm£21.49RSP Braze On Front Mech Clamp 34.9mm
Simple solution for fitting braze on front mechs to frames without the tab.
SRAM 10 Speed PowerPack PG-1030 Cassette and PC-1031 Chain 11-28T
The SRAM Powerpack gives you SRAM’s fantastic quality cassette and chains at a great price.
£39.99Oxford Junior BMX Bottom Bracket Set
Complete cup and caged bearing set
Fits junior 44mm BB shell size£5.99
Oxford Chainwheel Set 3/32” x 34/50T x 170mm Alloy Steel CW382
Forged alloy crank arms with integrated alloy spider
£51.99Sunrace RDM2T 6/7 Speed Rear Derailleur Long Cage Direct Mount
Sunrace RDM2T 6/7 Speed Rear Derailleur Long Cage Direct Mount
£5.49Oxford One Piece Crank Arm 140mm
Oxford 140mm One Piece Crank Arm in Silver
£7.99SunRace 6/7/8 Speed 116L Chain in Grey Unboxed
- Speed: 6/7 speed
- Pitch: 1/2″ x 3/32″
- Finish: Gray
- Pin material: Steel
- Pin power: ≧150kgf
- Roller: Steel
- Outer & Inner plate material: SAE1008
- Tensile strength: ≧820kgf
- Not Boxed
£3.99
Alison's Biciclette
- Oakfield Cottage, Broadoak Newnham on Severn, Gloucestershire, United Kingdom (UK)
- admin@alisonsbiciclette.co.uk
- No ratings found yet!